Oris Caliber 632 Watch Movement spare parts
Oris Caliber 632 Watch Movement Spare Parts
The Oris Caliber 632 is a Swiss-made manual-winding mechanical watch movement introduced around 1965. It belongs to the Oris 632 movement family and features a central sweep seconds hand. Its compact construction and traditional mechanical design make it an interesting movement for vintage watch enthusiasts and hobbyist watchmakers.
Finding suitable replacement components is important when restoring or servicing this vintage calibre. Original and compatible spare parts may be available through specialist watch-parts suppliers and donor movements.
Oris Caliber 632 – Technical Specifications
– Manufacturer: Oris
– Country of origin: Switzerland
– Caliber number: 632
– Movement type: Mechanical, manual winding
– Jewels: 21 or 25 (variants)
– Frequency: 18,000 vibrations per hour (2.5 Hz)
– Power reserve: Approximately 41 hours
– Movement diameter: 24.5 mm
– Movement height: 4.20 mm
– Size: 10.75 lignes
– Seconds: Central sweep seconds
– Winding system: Manual crown winding
– Setting system: Stem setting
– Shock protection: KIF
– Introduction: Approximately 1965
Oris Caliber 632 Spare Parts
When servicing an Oris 632 movement, the following components may require inspection, repair or replacement:
– Balance wheel and balance staff
– Balance spring and regulating components
– Escape wheel and pallet fork
– Mainspring and barrel assembly
– Centre wheel and third wheel
– Fourth wheel and pinions
– Winding pinion and sliding pinion
– Crown wheel and ratchet wheel
– Setting lever and yoke
– Watch movement stem
– Jewels and bearings
– Mainplate and bridges
– Hands and dial-fitting components
Related Oris Calibers
The Oris 632 belongs to a movement family that includes:
– Oris 632 – Manual winding
– Oris 635 – Manual winding with date
– Oris 645 – Automatic with date
– Oris 648 – Automatic with day and date
These related calibers share family characteristics, but their components should not automatically be considered interchangeable.
Spare Parts Identification and Restoration
Before purchasing replacement parts, watchmakers should verify the exact caliber number, movement dimensions, jewel configuration and component references. Particular attention should be given to the balance staff, mainspring, stem and winding mechanism.
The Oris 632 is documented with both 21-jewel and 25-jewel variants. Therefore, checking the original movement before ordering components is essential.
For vintage watch enthusiasts and hobbyist watchmakers, preserving the original Oris Caliber 632 movement through careful servicing and correct spare-parts selection helps maintain the mechanical character and historical value of these Swiss vintage watches
For any Watch Spare Parts inquiry, Email us for rate and availability: [email protected]
Watch Parts Enquiry
* If you are unable to fill out any of the required information fields, please type “N/A”.
Stem, Crown, Hands & Spares might be available for this movement.
Email us for rate and availability: [email protected]
Mobile/WhatsApp: +91- 9841 360 340